U.S. flag

An official website of the United States government, Department of Justice.

Dot gov

The .gov means it’s official.
Federal government websites always use a .gov or .mil domain. Before sharing sensitive information online, make sure you’re on a .gov or .mil site by inspecting your browser’s address (or “location”) bar.

Https

The site is secure.
The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

Development of a Capillary Electrophoresis Method for the Screening of Human Urine for Multiple Drugs of Abuse

NCJ Number
241148
Date Published
Author(s)
Ahmed Alnajjar, Abubakr M. Idris, Bruce McCord, Marika Multzenberg
Annotation
A new capillary electrophoresis (CE) method was developed and validated for screening human urine for 19 drugs of abuse.
Abstract
Since its inception, CE has proven to have use in the analysis and detection of drugs of abuse due to its high efficiency, reduced sample volume, and rapid analysis; however, when used in standard operating models, CE is not sufficiently sensitive to be applied to trace analysis due to low injection volumes and limited detection path lengths. The current study determined that sample pre-concentration can provide an alternative approach for sensitivity improvement. Techniques, such as solid-phase extraction (SPE), liquid-liquid extraction, and solid-phase microextraction can be used in combination with CE to improve sensitivity. These extraction procedures can be performed through the use of sequential injection (SI) techniques. SI, a second-generation flow injection technique, involves the reduction of sample and reagent volume from milliliters to microliters. In addition, the full automation of the technique enables the entire process to be rapid and precise. Testing results are shown for each of the 19 drugs. The descriptions of materials and methods address chemicals and reagents, instrumentation, CE system, the preparation of standard solutions and samples, the SI-SPE procedure, and the CE procedure. Details are presented on CE development, SI-SPE development, and validation of the method. 4 figures, 2 tables, and 31 references
Date Created: December 30, 2007