The project had three focus areas: 1) the coupling of temperature and humidity to improve the superglue fuming of latent prints; 2) the importance of surface composition on the growth of polymer during superglue fuming of latent prints with controlled temperature and humidity; and 3) the importance of cyanoacrylate formulation on optimizing the fuming of latent prints. The project activities conducted in each of these focus areas are described. The findings related to the first focus area indicate that an ambient relative humidity with surface temperatures near 10 degrees C provided the optimum quality of visual fingerprints fumed with Sirchie ethyl cyanoacrylate. Regarding the second focus area, the examination of the impact of surface composition has posed challenges, since the accurate monitoring of print growth during gumming on polyethylene surfaces became untenable due to the fluctuating mass of the polyethylene itself. In addition, there was little difference between the poly ethyl cyanoacrylate (PECA) formed from prints on glass and polyethylene terephthalate. Regarding the project's third focus area, LumiCyano proved to be a beneficial alternative to commercial cyanoacrylate when the manufacturer's instructions are followed. Overall, the project's results are most promising in impacting policy and practice in providing additional insight into the impact of temperature and humidity on the fuming of latent prints. Fuming chambers with temperature control should be developed. A listing of project presentations and publications
Downloads
Similar Publications
- Trauma Behind the Keyboard: Exploring Disparities in Child Sexual Abuse Material Exposure and Mental Health Factors among Police Investigators and Forensic Examiners – A Network Analysis
- High-throughput LC-PDA Method for Determination of Δ9-THC and Related Cannabinoids in Cannabis Sativa
- Enhancing Genetic and Epigenetic Sample Preparation with Microfluidics